K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
10. Check the solenoid screens (1 and 2) on the spacer plate for damage or debris.
Replace the solenoid screens if necessary.
11. Remove the 3-4 accumulator spring (1) from the valve body (3).
12. Remove the 3-4 accumulator piston (2) from the valve body (3).
13. Remove the accumulator pin (4) from the valve body (3).
14. Remove the 3-4 accumulator piston oil ring seal from the 3-4 accumulator piston (2).
15. Remove the remaining control valve body if required.
Installation Procedure
^
Tools Required
-
J 25025-5 Guide Pin
