K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
9. Install the new oil seal using the J 24428 or J 24428-A.
10. Install the wheel hub to the axle housing.
11. Install the adjusting nut to the hub using the J 2222-C.
12. Adjust the wheel bearings.
13. Install the axle shaft.
14. Install the brake drum.
15. Install the tire and wheel assembly.
16. Inspect and add axle lubricant to the axle housing, if necessary.
17. Lower the vehicle.
9.5 Inch Axle
Rear Oil Seal and/or Bearing Replacement
Tools Required
^ J 8092 Universal Driver Handle 3/4 in-10
^ J 29709 Wheel Bearing Installer
