K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
Constant Velocity Joint: Service and Repair
Front Wheel Drive Shafts Boot Cover Replacement
Disassembly Procedure
1. Use side cutters to cut the halfshaft boot cover clamps (2) and the nylon strap (1).
Important: If the halfshaft boot cover will be reused, do not damage the halfshaft boot cover while removing the clamps.
2. Slide the halfshaft boot cover (1) off of the halfshaft, over the CV joint end.
3. Check the halfshaft boot cover (1) for rips, tears, worn spots or other damage. Reuse the halfshaft boot cover (1) if there is no damage visible.
Assembly Procedure
^
Tools Required
-
J 41187 Band-it Type Tool
1. Insert new clamps (3) into the original halfshaft boot cover (1) (if you are reusing the original halfshaft boot cover.
