K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
10. Use J41187in order to tighten the outboard cover clamp (1).
11. Rotate J 41187 toward the clip in order to bend the band onto the clip.
12. Pull the tool's cutting handle in order to cut off the excess band.
13. Pound the band flat between the latch tabs. Peen the latch tabs over in order to lock the band into position.
14. Gather the halfshaft boot cover material at the center. Wrap the halfshaft boot cover (1) tightly with the nylon strap (2) provided in the kit.
