K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
1. Install the shift lever to the shift tower.
If required, use the shift lever adjusting nut to center the shift lever.
^
Tighten the shift lever nut to 47 Nm (35 ft. lbs.).
2. Position the retainer and shift boot onto the shift lever.
3. Install eight screws securing the shift boot and insulator to the floor panel.
^
Tighten the screws to 2 Nm (18 ft. lbs.).
4. Install four plastic retainer plugs securing the shift boot retainer to the shift boot.
