K 20 3/4 Ton Pickup 4WD V8-379 6.2L DSL VIN J FI (1983)
Headlamp Switch: Service and Repair
Fig. 9 Headlamp switch. C, G, K, R & V models
C, K, R & V MODELS
1.
Disconnect battery ground cable.
2.
Reaching behind instrument cluster, depress shaft retaining button and remove switch knob and rod.
3.
Remove left side instrument cluster bezel screws, then pull outward on bezel and hold switch retaining nut with wrench, Fig. 9.
4.
Disconnect wiring connector, then rotate switch counterclockwise and remove from vehicle.
5.
Reverse procedure to install.
