K 20 P/U 4WD V8-350 5.7L (1985)
FIGURE 1
Refer to figure 1.
1.
Remove the air cleaner assembly.
2.
Locate the carburetor solenoid.
3.
Inspection:
^
If there is a single wire pigtail which is pink with a black stripe connected to the anti-dieseling solenoid no further action is required. Proceed
to step 4.
^
If there is nothing connected to the anti-dieseling solenoid locate the pink with a black stripe pigtail which is part of the engine harness and
connect it to the anti-dieseling solenoid. Proceed to step 4.
SERVICE PROCEDURE
^
If there is a dark green electrical pigtail connected to the anti-dieseling solenoid unplug it and tape it back out of the way. Locate the pink
with a black stripe pigtail which is part of the engine harness and connect it to the solenoid.
4.
Reinstall air cleaner assembly.
5.
Install Campaign Identification Label per instructions in this bulletin.
