K 2500 Suburban 4WD V8-6.0L VIN U (2001)
10. Install the threaded plates (1) into the open end of the cross rails (5) ensuring that the holes in the cross sills align to the threaded plates.
11. With an assistant install the rear assist step assembly to the vehicle.
12. Install the retainers (3) and make adjustments by adding shims.
13. Tighten the threaded plate retainers (3) to 20 N.m.
14. Tighten the retaining bolt (4) to the cross sill to 9 N.m.
15. Ensure proper alignment of front rear assist steps after tightening all retainers.
16. Install retainers (1) to splash guard.
17. Remove protective film to attach assist step splash guard to rear wheel well.
18. Install the rear splash guard.
19. Install the retainers.
20. Align the splash guard to the wheel well.
21. Remove the protective film and press firmly to secure to the wheel well surface.
