K 2500 Suburban 4WD V8-6.0L VIN U (2001)
1. Position the electrical connectors through the water deflector.
2. Using waterproof tape or 3M(R) 777 (or equivalent), install the water deflector to the door.
3. Install the trim panel to the door.
Water Deflector Replacement - Side Access
REMOVAL PROCEDURE
IMPORTANT: Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive between the
deflector and the door secures the deflector.
1. Remove the trim panel.
2. Using a flat-blade tool, break the bond between the sealer and the door.
3. Pull the waterproof sealing tape from the deflectors.
4. Remove the water deflectors.
INSTALLATION PROCEDURE
