K 2500 Suburban 4WD V8-6.0L VIN U (2001)
3. Install the U-channel (1).
Notice: Refer to Fastener Notice.
4. Install the recliner screw (5).
Tighten the screw to 10 N.m (89 lb in).
5. Install the front recliner attachment bolts (4).
Tighten the bolts to 53 N.m (39 lb ft).
6. Attach the recliner cable (1) to the folding mechanism (3).
7. Attach the bolts holding the seat back folding mechanism.
Tighten the bolts to 21 N.m (15 lb ft).
8. Install the outboard pivot bolt.
Tighten the bolt to 35 N.m (26 lb ft).
9. Install the seat back frame.
10. Install the seat cushion frame.
11. Install the seat trim panel.
