K 2500 Suburban 4WD V8-6.0L VIN U (2001)
Parking Brake Cable: Service and Repair
Right Rear
Park Brake Cable Replacement - Right Rear
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Relieve the tension on the cable by loosening the nut at the equalizer.
4. Disconnect the cable from the equalizer.
5. Remove the bolt from the rear axle clip.
6. Remove the cable from the differential clip.
7. Remove the cable from the mounting bracket by depressing the locking tabs.
