K 2500 Suburban 4WD V8-6.0L VIN U (2001)
9. Install the engine shield.
10. Install the engine shield bolts.
^
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
11. Lower the vehicle.
Important: A distinct snap should be heard when assembling cooler pipe fittings to the quick connect fittings. To insure the pipe is fully inserted into
the quick connect fitting, check by giving the pipe a forceful tug.
12. Firmly push the oil cooler pipe fittings straight into the radiator quick connect fittings.
13. Install the oil cooler pipes to the retaining clip.
14. Install the plastic caps onto the quick connect fittings.
Important:
^
Do not use the plastic cap in order to install the cooler line into the fitting.
^
Do not manually depress the retaining clip when installing the plastic cap.