K 2500 Suburban 4WD V8-6.0L VIN U (2001)
3. If vehicle is a crew cab pick-up truck, install the exhaust heat shield(s) to the studs.
4. Install the exhaust heat shield nuts.
^
Tighten the exhaust heat shield nuts to 9 Nm (80 inch lbs.).
5. If vehicle is a extended cab pick-up truck, install the exhaust heat shield (1, 2) to the studs.
6. Install the exhaust heat shield nuts.
^
Tighten the exhaust heat shield nuts to 9 Nm (80 inch lbs.).
7. If vehicle is a regular cab pick-up truck, install the exhaust front heat shield (1) and/or the exhaust heat shield (2) to the studs.
8. Install the exhaust heat shield nuts.
^
Tighten the exhaust heat shield nuts to 9 Nm (80 inch lbs.).
