K 2500 Suburban 4WD V8-6.0L VIN U (2001)
Hose/Line HVAC: Service and Repair
A/C Suction Hose/Line
SUCTION HOSE REPLACEMENT (W/ DENSO)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the suction hose mounting bolt from the compressor.
3. Disconnect the suction hose (2) from the compressor.
4. Remove the compressor suction nut at the accumulator.
5. Disconnect the hose from the accumulator.
6. Remove the suction hose assembly from the vehicle.
7. Discard all of the used sealing washers. Cap the system openings.
INSTALLATION PROCEDURE
