K 2500 Suburban 4WD V8-6.0L VIN U (2001)
1. Lubricate the new lower injector O-ring seals (4) with clean engine oil.
2. Install the new O-ring seals (4) on the spray tip end of each injector (3).
3. Remove the crossover tube to the right fuel rail retainer (21).
4. Remove the crossover tube (25) from the right fuel rail (15).
5. Remove the O-ring (20) from the crossover tube (25).
6. Install a new O-ring on the crossover tube.
7. Lubricate the new O-ring with clean engine oil.
8. Install the crossover tube (25) into the right fuel rail (15).
9. Loosely install the crossover tube to the right fuel rail retainer (21).
