K 2500 Suburban 4WD V8-6.0L VIN U (2001)
3. Remove the power steering outlet hose (4) from the power steering gear (3).
4. Remove the power steering inlet hose from the power steering pump (1).
5. Remove the bolts (2) retaining the cooler to the radiator support.
6. Remove the power steering cooler from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the power steering cooler (1) to the vehicle.
-
Tighten the power steering cooler retaining bolts to 5 Nm (44 inch lbs.).
