K 2500 Suburban 4WD V8-6.0L VIN U (2001)
1. Install the pump.
2. Install the bolts to the front of the pump.
-
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the nuts to the rear of the pump (1).
-
Tighten the bolts to 50 Nm (37 ft. lbs.).
4. Install the hoses to the pump.
-
Tighten the nut to 28 Nm (20 ft. lbs.).
5. Install the power steering pulley. Refer to Power Steering Pulley Replacement.
6. Fill and bleed the power steering system. Refer to Bleeding the Power Steering System.