K 2500 Suburban 4WD V8-6.0L VIN U (2001)
5. Remove the adjustment bolt (3) and the adjuster nut (4) (K 25/35 Series with MT1, MW3, C5F and COP).
6. Remove the J 36202, allowing the torsion bar to unload.
7. Remove the adjustment arm by sliding the torsion bar forward until the torsion bar clears the adjustment arm. Use your hand to support the
adjustment arm as the adjustment arm releases from the torsion bar.
8. Remove the torsion bar crossmember bolts (4) from the weld nuts (1).
