K 2500 Suburban 4WD V8-6.0L VIN U (2001)
Output Shaft: Service and Repair
NV 3500 - Manual Transmission
Transmission Housing Oil Seal Replacement (Rear Seal 4WD)
Transmission Housing Oil Seal Replacement (Rear Seal 4WD)
^
Tools Required
-
J 36825 Output Shaft Oil Seal Remover
-
J 23907 Slide Hammer
-
J 36502-2A Output Shaft Seal Protector/Installer
-
J 36502 Extension Housing Seal Installer Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove transfer case.
3. Using J 36825 and J 23907 remove the seal from the extension housing.
Installation Procedure
1. Position J 36502-2A over the output shaft.