K 2500 Suburban 4WD V8-6.0L VIN U (2001)
Seals and Gaskets: Service and Repair
Manual Transmission - NV 4500
Transmission Housing Oil Seal Replacement (Front Seal Replacement)
^
Tools Required
-
J 41371 Reluctor Gear Puller
-
J 38801 Output Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft.
3. Remove the transmission.
4. Remove the 2 clutch actuator bolts.
5. Remove the clutch actuator from the input shaft.
6. Remove the 4 bolts from the front bearing retainer.
Carefully remove the front bearing retainer.
