K 2500 Suburban 4WD V8-6.0L VIN U (2001)
1. Remove the control lever nut (1) from the lower control lever.
2. Remove the lower control lever (3) from the shift control housing (2). Lightly tap the housing from the lever.
3. Remove the lower control lever pivot pin bushings (4).
4. Remove the lower control lever boot from the shift control housing.
Inspection and Repair
1. Clean the lower control lever and parts in cleaning solvent. Air dry.
2. Inspect the threads (1) on the lower control lever for damage.
3. Inspect the lower control lever (2) for being bent.
4. Inspect the pivot pins (3) on the lower control lever for excessive wear.
5. Inspect the lower control lever pivot pins bushing for cracking or wear.
6. Inspect the shift control housing for excessive wear in the pivot pin bushing slots (5).
7. Inspect the lower control lever boot for tears or cracking.
8. Replace any parts found with damage.
