K 2500 Suburban 4WD V8-6.0L VIN U (2001)
8. Remove the gasket from the adapter.
Installation Procedure
Important: Always use a new gasket and seal for the adapter. Do not use any type of sealant or adhesive in place of or with the gasket or the seal.
1. Install the new seal on the adapter.
Important: The transfer case adapter must be installed so that the adapter is evenly seated to the transmission before installing the retaining nuts.
2. Install the adapter to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the adapter mounting bolts to the transmission.
^
Tighten the mounting bolts to 50 Nm (36 ft. lbs.).
