K 2500 Suburban 4WD V8-6.0L VIN U (2001)
Power Window Control Module: Service and Repair
Module Replacement - Rear Power Window
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the window.
4. Remove the window sash.
5. Remove the window weatherstrip.
6. Remove the module from the door.
INSTALLATION PROCEDURE
1. Install the module to the door.
2. Install the window weatherstrip.
3. Install the window sash.
4. Install the window.
5. Install the water deflector.
6. Install the trim panel.
