K 2500 Truck 4WD V6-262 4.3L (1988)
Lower Side Moulding / Trim: Customer Interest
Exterior - Gap Between Emblem and Side Molding
Number:
88-48
Section:
10
Date:
December, 1987
SUBJECT:
SERIES EMBLEM TO BODY SIDE MOLDING GAP
MODELS:
1988 C/K
Some 1988 C/K models may have a gap between the series emblem and the body side molding on the front door. If this gap exists, it can be eliminated
by performing the following procedure:
^
Remove series emblem from the body side molding.
Note:
Removal is accomplished by pulling or prying.
^
Clean all dirt, oil and grease from the back of the series emblem and the body side molding.
