chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Turbo Hydra-Matic 4L80-E & 4L80-EHD|Page 6759 > < A/T - 4L80-E 2nd Gear only After A Cold Start/DTC 87|Page 6754

K 2500 Truck 4WD V6-262 4.3L VIN Z TBI (1995)

Page 1
background image

Seals and Gaskets: Service and Repair
Turbo Hydra-Matic 4L80-E & 4L80-EHD

1. Remove driveshaft, and tunnel strap, as equipped.
2. Using suitable tool, pry out lip oil seal.
3. Coat outer casting of new oil seal with suitable sealer and drive into place with installer tool Nos. J-38694 or J-38869 or equivalents.
4. Install driveshaft.

Turbo Hydra-Matic 4L80-E & 4L80-EHD|Page 6759 > < A/T - 4L80-E 2nd Gear only After A Cold Start/DTC 87|Page 6754