K 2500 Truck 4WD V8-305 5.0L VIN M SFI (1996)
Drive Belt Tensioner: Testing and Inspection
Remove or Disconnect
1. Negative battery cable.
2. Multiple ribbed drive belt.
^
Position a hex head socket on the belt tensioner pulley bolt head.
^
Move the drive belt tensioner through its full travel.
NOTICE: Do not allow the drive belt tensioner to snap into the "free" position. This may result in damage to the tensioner.
^
Movement should feel smooth and return freely without any binding. If any binding is observed, replace the tensioner.
Install or Connect
1. Multiple ribbed drive belt.
2. Negative battery cable.