chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Antilock Brake Module <--> [Electronic Brake Control Module] > < Gear Sensor/Switch, Transfer Case|Locations
Page 1
background image

ABS Light: Technical Service Bulletins
Brakes - ABS Code 9 Misdiagnosis

Subject: REAR WHEEL ANTI-LOCK (RWAL) CODE 9 MISDIAGNOSIS

Model and Year:

1988-89 C, K TRUCKS 1989 S/T, M TRUCKS

Number:

89-113-5

Section:

5

Date:

MARCH, 1989

TO:

ALL CHEVROLET DEALERS

The instrument panel brake warning light (I.P.) will only come on when an abnormal condition exists within the RWAL system. The ECU module will
only store one condition (or code) at a time. The vehicle should be test driven after the initial condition has been resolved to determine if any other
conditions (codes) exist.

It should be noted that if the I.P. brake warning light is not on, it can be induced to come on by grounding diagnostic terminal "H" to "A" for more than
20 seconds. When this occurs, a Code 9 will be set.

This is a peculiarity with the RWAL system, and should not be interpreted as a faulty condition. Technicians who have accidentally induced a Code 9 in
this manner should simply clear the code prior to returning the vehicle to the customer.

Antilock Brake Module <--> [Electronic Brake Control Module] > < Gear Sensor/Switch, Transfer Case|Locations