K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Door Lamp: Service and Repair
Door Jamb Switch Replacement
REMOVE OR DISCONNECT
1. Negative battery cable.
-
Reach up under the instrument panel, squeeze the switch tangs together, and push the switch through the side of the instrument panel.
2. Door jamb switch electrical connector.
3. Door jamb switch.
INSTALL OR CONNECT
1. Door jamb switch to the electrical connector. Squeeze the switch tangs together, and push the switch into the side of the instrument panel.
2. Negative battery cable.
