K 2500 Truck 4WD V8-454 7.4L VIN J SFI (1997)
Power Steering Pump: Service and Repair
On-Vehicle Service
^
Tools Required:
-
J 25034-B Power Steering Pump Pulley Remover
-
J 25033-B Power Steering Pump Pulley Installer
-
Or Equivalents
REMOVAL
NOTE: Place a drain pan below the pump.
Remove or disconnect the following:
1. Hoses. Cap the hoses.
2. Unload the tensioner assembly.
3. Drive belt.
4. Pulley.
-
Install J 25034-b. Be sure the pilot bolt bottoms in the pump shaft by turning the nut to the top of the pilot bolt.
-
Hold the pilot bolt.
-
Turn the nut counterclockwise.
5. Front mounting bolts.
6. Rear mounting nuts from studs.