K 2500 Truck 4WD V8-5.7L VIN R (1996)
Compressor Clutch Coil: Service and Repair
Installing - Removing Pulley Rotor & Bearing Assembly Retaining Ring
Remove and Disconnect
1. Remove the clutch plate and hub assembly as described previously.
2. Remove rotor and bearing assembly retaining ring, using snap ring pliers J 6083.
Installing Pulley Rotor/Bearing Puller Guide
Removing Pulley Rotor And Bearing Assembly
3. Install pulley rotor and bearing puller guide J 33023-A to the front head and install J 41552 pulley rotor and bearing puller down into the inner
circle of slots in the rotor. Turn the J 41552 puller clockwise in the slots in the rotor.
4. Hold the J 41552 puller in place and tighten the puller screw against the puller guide to remove the pulley rotor and bearing assembly.