K 2500 Truck 4WD V8-5.7L VIN R (1996)
13.
Reinstall bolts from catalytic converter to exhaust pipe flange and torque to 48 Nm (35 lb. ft.) (Figure 1, Item 4).
14.
Reinstall transmission pan shield.
15.
Reinstall right side oxygen sensor, including electrical connector. (Figure 1, Item 3) and torque to 41 Nm (30 lb. ft.).
16.
Reinstall left side oxygen sensor, including electrical connector. (Figure 1, Item 2) and torque to 41 Nm (30 lb. ft.).
17.
Lower vehicle
18.
Install Campaign Identification Label.
Campaign ID Label & Claim Information
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label."
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. When installing the new Campaign Identification Label, be sure to install the clear protective covering. Additional
Campaign Identification Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m. to
4:30 p.m. EST). Ask for Item Number S-1015 when ordering.
Apply "Campaign Identification Label," only on a clean dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated as shown.
Refer to the General Motors Corporation Claims Processing Manual for details on Product Campaign Claim Submission.
Owner Letter
Dear Chevrolet Customer: