K 2500 Truck 4WD V8-5.7L VIN R (1996)
Shift Cable: Service and Repair
4L60-E (M30) Transmission
REMOVE OR DISCONNECT
-
Apply the parking brake
-
Position the steering column shift lever to park.
-
Raise and support the vehicle.
1. Front seat.
2. Door sill trim plate.
3. Hinge pillar trim panel.
4. Carpet and carpet retainers on the driver's side to expose the shift cable.
5. Steering column filler panel from the steering column.
6. Shift cable from the steering column shift control.
-
Prior to removing the shift cable from the vehicle, ensure that the transmission is in the mechanical park position. The transmission control
lever can be positioned to mechanical park by rotating the control lever clockwise until it reaches its full clockwise stop position.
7. Shift cable from clip and/or tape on floor pan.
