K 2500 Truck 4WD V8-5.7L VIN R (1996)
-
Tighten nut to 73 Nm (54 ft. lbs.).
9. Outer tie rod to steering knuckle using J 29193. Tighten tool to 54 Nm (40 ft. lbs.).
10. New outer tie rod prevailing torque nut.
-
Tighten nut to 62 Nm (46 ft. lbs.).
11. Brake pipe support bracket to the upper control arm.
-
Tighten nut to 17 Nm (13 ft. lbs.).
Important: Make sure that the brake hose is not twisted or kinked, or damage to the hose could result.
12. Hub nut washer (202) and nut (203). Seat shank splines in hub.
13. Insert a drift through brake caliper to prevent drive axle (halfshaft) from turning.
-
Tighten inboard flange bolts to 78 Nm (58 ft. lbs.).
14. Hub nut.
-
Tighten hub nut to 225 Nm (165 ft. lbs.).
15. Remove drift and install wheels.
16. Remove safety stands, and lower the vehicle.
Right Side
