K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F (1995)
If such an additive is to be used, it must not contain alcohol or other water emulsifiers.
*Stanadyne Lubricity Additive Information
The Stanadyne Lubricity Additive will be suggested for use on any repeat 6.5L fuel injection pump concerns. The additive should also be suggested if
the dealer is experiencing repeat 6.5L fuel injection pump concerns on other vehicles in their area.
Two pint-size bottles of Stanadyne Lubricity Additive should be used during the break-in period of the repeat 6.5L fuel injection pump. Follow the
Stanadyne Lubricity Additive instructions for fuel mixing.
The dealer should contact a local Stanadyne Dealer to order the Stanadyne Lubricity Additive. The Stanadyne part number for the Pint size treatment
bottle is 32174. The Pint size bottle will treat 454-Liters (120-gallons) of fuel.
*We believe this source and their products to be reliable. There may be additional manufacturers of such products. General Motors does not endorse,
indicate any preference for or assume any responsibility for the products from this firm or for any such products which may be available from others
sources.
Labor Operation Times for the replacement of the fuel filter element (J5420) and fuel system clean and flush (L1000) are maintenance repairs and have
been removed from the Labor Time Guide. The replacement of the fuel filter element and fuel system clean and flush outlined in this bulletin may be
customer pay.
Parts Information
Warranty Information
Labor Operation Times for the replacement of the fuel filter element (J5420) and fuel system clean and flush (L1000) are maintenance repairs and have
been removed from the Labor Time Guide.
For vehicles repaired under warranty, use the table.
