K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
2. Install the speaker by snapping the top retainer into place.
3. Install the trim panel.
Verify the component's operation.
Rear Door (Crew Cab)
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the screws (1) retaining the speaker to the mounting bracket.
3. Disconnect the electrical connector from the speaker.
4. Remove the speaker from the mounting bracket.
5. Remove the bolts (2) retaining the speaker mounting bracket to the door, if required.
6. Remove the speaker mounting bracket.
INSTALLATION PROCEDURE