K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Tighten the trim panel screws to 2 Nm (18 lb in).
7. Install the manual lock lever to the trim panel.
8. Install the upper extension of the trim panel. Refer to Upper Extension Trim Panel Replacement (See: Upper Extension Trim Panel Replacement
).
9. Install the door handle bezel. Refer to Door Inside Handle Bezel Replacement (See: Door Inside Handle Bezel Replacement).
Upper Extension Trim Panel Replacement
Upper Extension Trim Panel Replacement
Removal Procedure
1. Open the front door.
2. Release the upper extension by pulling outward on the front edge in order to release the upper retainer clips.
3. Remove the upper extension from the trim panel by lifting up and out.
Installation Procedure
1. Position the lower retainer to the trim panel.
2. Align the upper retainer clips to the door frame.
3. Press inward on the upper extension until the clips fully engage securing the panel to the door.