chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Side Access Door - Squeak or Scraping Noise|Page 14451 > < Side Access Door - Squeak or Scraping Noise|Page 14449
Page 1
background image

Rear Door Limiter: Service and Repair

REMOVAL PROCEDURE

1. Fully open the door.
2. Remove the door trim panel.
3. Remove the water deflector.
4. Remove the body-side check strap bolt.
5. Remove the check strap plug.
6. Remove the door-side check strap nuts.
7. Pull the check strap from the inside of the door.

INSTALLATION PROCEDURE

1. Install the check strap in the door.
2. Install the check strap in the body.

NOTE:  Refer to Fastener Notice in Service Precautions.

3. Install the check strap nuts. 

Tighten
Tighten the nuts to 9 N.m (80 lb in).

4. Install the check strap bolt.

Tighten

Side Access Door - Squeak or Scraping Noise|Page 14451 > < Side Access Door - Squeak or Scraping Noise|Page 14449