K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Connect the electrical connectors, if necessary.
2. Align the retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel down into the retainer holes in order to seat the retainers.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) in Cautions and Notices.
4. Install the trim panel screws.
Tighten the trim panel screws to 2 Nm (18 lb in).
5. Install the manual lock lever by pressing the lever until the lever is completely seated.
6. Connect the electrical connector to the reflector lamp, and install the reflector by pressing the reflector until the reflector is completely seated, if
removed.
7. Install the window-regulator handle, if necessary. Refer to Door Window Regulator Handle Replacement (See: Windows and
Glass/Windows/Window Handle/Service and Repair).
8. Install the door handle bezel. Refer to Door Inside Handle Bezel Replacement (See: Front Door/Front Door Panel/Service and Repair/Door
Inside Handle Bezel Replacement).
