K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Cross-Member: Service and Repair
Engine Front Crossmember Replacement (4WD)
Engine Front Crossmember Replacement (4WD)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the differential carrier shield. Refer to Shield Replacement .
3. Remove the bolts retaining the crossmember to the frame.
4. Remove the crossmember from the vehicle.
Installation Procedure