K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Seat Track: Service and Repair
Seat Adjuster Replacement - Front (Manual)
REMOVAL PROCEDURE
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion frame.
4. Remove the seat back frame.
5. Remove the seat back hinge/recliner mechanism.
6. Remove the seat adjuster track cover.
7. Remove the inboard seat belt buckle and nut (1). Disconnect the electrical connection (2).
8. Remove the bar (1) from the adjuster tracks (2). Straighten the tabs in order to remove the bar.
9. Remove the cross brace (3).
10. Remove the EZ entry rod (4), if equipped with the EZ entry feature.
11. Remove the cushion tilt mechanism, if equipped.
INSTALLATION PROCEDURE