K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the cushion tilt mechanism, if equipped.
2. Install the EZ entry rod (4), if equipped with the EZ entry feature.
3. Install the cross brace (3).
4. Install the bar (1) onto the racks (2). Bend the tabs in order to secure the bar.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the inboard seat belt buckle and nut (1).
Tighten
Tighten the nut to 53 N.m (39 lb ft).
6. Connect the electrical connection (2).
7. Install the seat adjuster track cover.
8. Install the seat back hinge/recliner mechanism.
9. Install the seat back frame.
10. Install the seat cushion frame.
11. Install the seat trim panel.
12. Install the front seat in the vehicle.
