K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal Replacement
Removal Procedure
1. Remove the pushrod retaining clip (4).
2. Remove the stoplamp switch (2) and the pushrod (3) from the brake pedal stud (1).
3. Remove the nut from the brake pedal bolt.
4. Remove the brake pedal bolt.
5. Remove the brake pedal.
Installation Procedure
1. Install the brake pedal.
2. Install the brake pedal bolt.
Notice: Refer to Fastener Notice in Service Precautions.