K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Notice: Refer to Support the Brake Caliper While Flex Hose is Connected Notice in Service Precautions.
3. Remove the brake caliper from the brake caliper mounting bracket and support the brake caliper with heavy mechanic's wire or equivalent. DO
NOT disconnect the hydraulic brake hose from the brake caliper.
4. Remove the brake pads from the brake caliper mounting bracket.
5. Remove the anti-rattle clips tram the brake caliper bracket.
6. Remove the brake caliper bracket mounting bolts (2).
7. Remove the brake caliper bracket (1).
8. Remove any contaminants or foreign material from the inside ends of the brake caliper bracket.
9. Clean the mounting surface and threads of the brake caliper bracket.
Installation Procedure
