K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Remove the cable from the lever, all except 15 series utilities.
8. Remove the cable from the backing plate by depressing the locking tabs.
9. Remove the cable.
10. Remove the cable from the lever, 15 series utilities.
11. Remove the cable from the backing plate by depressing the locking tabs.
12. Remove the cable.
Installation Procedure
1. Install the cable taking care to correctly route the cable through the guides and the body mounts.
2. Install the cable to the backing plate by pressing the cable into place until locking tabs snap into place, 15 series utilities.
3. Install the cable to the lever.
