K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Parking Brake Shoe: Service and Repair
Park Brake Shoe Replacement (RPO NYS)
Park Brake Shoe Replacement (RPO NYS)
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar.
5. Remove the rear park brake bracket bolt.
6. Remove the park brake cable from the park brake actuator lever.
7. Remove the wheel bearing.
8. Remove the park brake assembly and backing plate from the steering knuckle.
9. Remove the park brake shoe retaining clip bolt and retaining clip.
