K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
12. Install a new O-ring to the water pump housing.
13. Lubricate the O-ring with engine coolant.
14. Install the water pump to the water pump housing.
Notice: Refer to Fastener Notice in Service Precautions.
15. Install the water pump to water pump housing bolts.
-
Tighten the water pump to water pump housing bolts to 21 Nm (15 ft. lbs.).
16. Install a new O-ring to the water pump.
Installation Procedure
1. Lubricate the water pump O-ring with engine oil.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water pump bolts. Ensure the correct length bolt is used in the proper location.
-
Tighten the water pump bolts to 21 Nm (15 ft. lbs.).