K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
5. Remove the camshaft reluctor screws.
6. Remove the camshaft reluctor.
7. Inspect the camshaft reluctor for damage.
8. Inspect the camshaft reluctor for being bent.
9. Replace the reluctor if damage is found.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the camshaft reluctor to the camshaft gear.
2. Install the camshaft reluctor bolts.
-
Tighten the camshaft reluctor bolts to 9 Nm (80 inch lbs.).
Important: Do not damage the teeth on the crankshaft reluctor assembly.
