K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Valve Cover: Service and Repair
Lower Left
Valve Rocker Arm Cover Replacement - Lower Left
Removal Procedure
1. Remove the upper left valve rocker arm cover.
2. Disconnect the injector wiring harness connectors.
Important: Do not drop the injector harness bolts in the cylinder head oil return ports.
3. Remove the injector harness bracket bolts for both injector harnesses.
4. Remove the encapsulated injector wire terminal nuts on each injector.
5. Remove both injector harnesses.
6. Remove the 12 lower valve rocker arm cover bolts.
7. Remove the lower valve rocker arm cover.
8. Remove the gasket from the lower valve rocker arm cover.
9. Remove the bolt grommets from the lower valve rocker arm cover.
