K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
10. Remove the bolt retaining the battery cable junction block from the power steering pump.
11. Move and secure the battery cables out of the way.
12. Disconnect the fuel hoses.
13. Remove the nut retaining the fuel hose bracket to the upper valve rocker arm cover.
14. Disconnect the fuel injection control module wiring harness connectors. Lift up on the latch in order to disconnect the connectors.
15. Remove the fuel injection control module wiring harness clip from the bracket.
16. Remove the bolts (1) retaining the fuel injection control module wiring harness connectors.
17. Remove the bolts (2) retaining the fuel injection control module wiring harness bracket.
18. Remove the water outlet tube.
19. Remove the glow plug relay bracket.
20. Remove the auxiliary generator, if equipped.
