K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Remove the drive belt (1) from the drive pulleys, if equipped with dual generators.
5. Remove the drive belt (1) from the drive pulleys, if equipped with dual generators and vacuum pump.
6. Slowly release the tension on the tensioner arm.
Inspection and Repair
1. Inspect the drive belt for excessive cracking or any damage to the drive belt.
2. Replace the drive belt if there is damage or excessive cracking.
Installation Procedure
1. Install the drive belt (1) to the drive pulleys, if equipped with dual generators and vacuum pump.
